{"id":1997,"date":"2026-05-09T11:58:46","date_gmt":"2026-05-09T09:58:46","guid":{"rendered":"https:\/\/polovnemasine.rs\/1501\/"},"modified":"2026-11-04T15:56:07","modified_gmt":"2026-11-04T14:56:07","slug":"sim-metal-lathe","status":"publish","type":"post","link":"https:\/\/polovnemasine.rs\/en\/sim-metal-lathe\/","title":{"rendered":"SIM metal lathe"},"content":{"rendered":"

SIM metal lathe<\/p>\n

Metal lathe SIM. Metalworking lathe machine from the French manufacturer S.A. Les Innovations M\u00e9caniques (SIM) located in Moret-sur-Loing.<\/p>\n

Metal Lathe SIM – Technical Specifications:<\/h2>\n\n\n\n\n\n\n\n\n\n
Specification<\/th>\nValue \/ Details<\/th>\n<\/tr>\n<\/thead>\n
Type<\/strong><\/td>\nT7 (Serial number 8541)<\/td>\n<\/tr>\n
Swing over bed<\/strong><\/td>\n315 mm (maximum workpiece diameter above the bed)<\/td>\n<\/tr>\n
Distance between centers<\/strong><\/td>\n500 mm (maximum workpiece length)<\/td>\n<\/tr>\n
Motor power<\/strong><\/td>\n6 kW, three-phase, operates at 220V and 50Hz frequency<\/td>\n<\/tr>\n
Date of manufacture<\/strong><\/td>\nMay 1969 (marked 5.69)<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n

\"SIM<\/a><\/p>\n

Feed values in material processing:<\/h2>\n\n\n\n\n\n\n\n
Processing Type \/ Lever<\/th>\nFeed Rates<\/th>\n<\/tr>\n<\/thead>\n
Finest finishing (red lever)<\/strong><\/td>\n0.07 mm\/rev – 0.035 mm\/rev – 0.05 mm\/rev<\/td>\n<\/tr>\n
Standard turning (orange lever)<\/strong><\/td>\n0.2 mm\/rev – 0.1 mm\/rev – 0.14 mm\/rev<\/td>\n<\/tr>\n
Roughing – heavy feed (green lever)<\/strong><\/td>\n0.6 mm\/rev – 0.3 mm\/rev – 0.4 mm\/rev<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n

Cross feed (for grooving or facing operations) is half of the longitudinal feed with the same lever setup.<\/p>\n

Additional data:<\/h2>\n

The lathe chuck is mounted via a flange plate directly onto the spindle.
\nTool post: The machine features a quick-change tool post system, which significantly increases productivity.
\nTailstock: Return center with Morse taper MT2 or MT3 – standard for this machine.
\nSpindle nose standard is Camlock<\/strong> D1-3″ or D1-4″.
\nSpindle nose diameter: 70.6 mm = Camlock D1-3″ or 82.6 mm = Camlock D1-4″.<\/p>\n\r\n