Veneer saw 3460-21.<\/p>\n
This machine is designed for clean, straight and completely smooth cutting of veneer packages without burring the edges, which is a key prerequisite for their perfect joining, before gluing to the panels.<\/p>\n
First, the machine uses a combined system with two working units. The saw in one pass performs the primary rough cutting of the veneer package. Immediately afterwards, the milling cutter removes the minimum layer of material. Therefore, this process leaves the edge of the veneer perfectly straight.
\nThen, a pneumatic pressure beam fixes the package over the entire length of 4000 mm. The massive beam uses air at a working pressure of about 8 bar. That is why the veneer sheets do not vibrate at all during cutting.
\nFinally, the machine offers manual carriage advance. The operator moves the cart manually via a lever. The automatic system enables continuous adjustment of the work speed.<\/p>\n
Brand: Langzauner, model LZ 2\/4000.
\nCutter for veneer up to 4 meters long.
\nCutting height: 45 mm.
\nSaw diameter: 180 mm.
\nSaw rotation speed: 9000 rpm.
\nCircular motor power: 2.2 KW.
\nDimensions of the cutter: 85 x 50 x 30 mm.
\nMilling speed: 10500 rpm.
\nMilling motor power: 1.1 KW.
\nWorking air pressure: 6 bar.
\nRequired air flow for dedusting: 1300 m3 \/ h.
\nNoise level: about 88 dB(A).
\nMachine weight: about 1200 kg.
\nMachine dimensions: 4500 x 1000 x 1200 mm.
\nYear of manufacture of the machine: 1986.
\nOrigin of the machine: Austria.
\nUsed, imported from the EU.<\/p>\n\r\n