Abrasive cut-off saw

Abrasive cut-off saw

Power and precision in metal cutting:

Kzubr K10301 is a powerful metal cutting tool. Masters often choose this model for workshops. It offers reliability and precision in operation. In addition, the machine enables fast completion of difficult tasks. Therefore, it is ideal for processing various metal profiles. Every user will appreciate its light and solid construction.

Engine performance:

The heart of this machine is a 1600 watt motor. It ensures constant power during cutting. Then, the number of revolutions reaches 3800 per minute. This guarantees clean and fast cuts. Namely, the engine does not overheat easily during operation. Also, the power transmission is very efficient. Quality windings extend the working life of the device. This device operates on standard mains voltage. It supports frequencies of 50 and 60 hertz. Consequently, you can use the machine almost anywhere. However, always check voltage stability before use. Powerful motor saves your time and effort. It easily overcomes hard steel pipes. Working with this tool is extremely simple.

Features of the cutting board:

The main tool is a disk with a diameter of 355 millimeters. It allows cutting thick materials at once. Moreover, the internal opening of the disc is 30 millimeters. This is the standard dimension for these tools. Replacing the disc is a simple and quick procedure. Therefore, you will not waste time during the working day. Proper disc selection improves results.
Cutting precision depends on the stability of the disc. This machine holds the cutting board firmly. In addition, vibrations are kept to a minimum. The work results are always smooth and accurate. In fact, the quality of the cut reduces the need for finishing. This further speeds up the entire production process. The stable stand ensures a safe and straight cut.

Estimated cutting capacity (at a 90° angle):

Round pipes: Maximum diameter up to 130 mm.
Square profiles: 110 x 110 mm.
Rectangular profiles: Up to 100 x 190 mm (depending on the position on the clamp).
L-profiles (angles): Up to 130 x 130 mm.

Important notes about thickness:

Solid iron: Although the machine can cut solid bars, it is recommended that the thickness of solid material does not exceed 25 – 50 mm to avoid overheating of the 1600 W (2 HP) motor.
Depth adjustment: The KCOM14-1600 model has a stop with which you can adjust the depth of the cut according to the thickness of the material.
45° angle: Note that when cutting at a 45° angle, the maximum capacity (cut width) is reduced by around 20–30%.

Safety and protection at work:

User safety comes first. The machine is marked with double insulation. This provides additional protection against electric shock. However, always use safety glasses and headphones. The symbols on the housing clearly warn of caution. Be sure to read the manual before starting for the first time. Careful handling prevents most possible accidents. Also, work exclusively in ventilated rooms. Metal shavings can be very dangerous. That’s why you wear the right work equipment. Finally, maintain your Xubr tool regularly. A clean machine works longer and safer. Proper handling prevents unwanted injuries and breakdowns. Your safety at work is priceless.

1Abrasive cut-off saw – Technical data:

Model: Kzubr K10301 (KCOM 14 – 1600).
Disc diameter: Ø 355 mm.
Disc opening: Ø 30 mm.
Motor power: 1600 W.
Number of revolutions: 3800 rpm.
Operating voltage: 220-230 V, frequency: 50/60 Hz.
Material clamp: The threaded spindle with the handle is clearly visible on the lower part. It is used for firmly fixing metal profiles before cutting.

Conclusion and application of tools:

The Kzubr K10301 is a great investment for DIYers. It combines power, precision and price. Namely, this model offers top performance to users. Therefore, you will easily complete any locksmith job. In addition, the quality of construction guarantees the longevity of the device. Many professionals confirm the quality of this brand.
In short, this saw meets all modern standards. It is a reliable partner in any locksmith shop. However, always respect the manufacturer’s technical specifications. In this way, you will make the most of the machine’s potential. Get your copy and boost your workshop today. A quality tool makes a difference in any project.

Abrasive cut-off saw is located in Mačvanska Mitrovica, Žarka Vucinića street 32 b (part of the city of Sremska Mitrovica), Serbia. The machine is in good condition and you can test it in operation. Transportation of the machine is carried out at the client’s expense, and after purchasing from our company, the metal cutting abrasive saw will be loaded onto the client’s vehicle free of charge. “Apocalypse” LLC has over 2,500 used machines in stock. Machines are mostly Italian made, of iron cast. We offer complete lines for the production of wooden crates of the Corali brand. «Apocalypse» LLC offers you complete lines for the production of: furniture, pellets, pallets, wooden doors and windows, as well as parquet. Be our guests, and let’s work together for mutual benefit.